After adding the takeoff delay, the crossing can happens when takeoff clearance but the plane is not moving, causing a weird and dangerous scene that runway incursion happens.
4 Likes
Hello,
we are aware of this situation and are checking if we can change it. There is already an internal task waiting to be taken over.
4 Likes
It should also be noted that landings have a higher priority than take-offs. Currently, landings are being hindered by pending take-offs. Unfortunately, GRU is not usable with the tower manager fully activated.
5 Likes
Sounds like a good gamplay logic post
It also happens in BKK’s 2 close-by runways. ATC priority works well with a single runway, but does not work at all with 2 runways like the ones in BKK and GRU.
6 Likes
I often encounter an issue at BKK where arriving aircraft stop crossing the runway and no longer land if there are too many departures. In reality, arriving aircraft waiting to cross the runway should be prioritized before allowing departing aircraft to take off.
5 Likes
I don’t know, I’ve seen like 5+ planes waiting to cross a runway at DFW because we kept letting departures takeoff.
1 Like
Yeah that’s very headaching.
Playing GRU is somewhat tiring unfortunately. Hopefully runway groups can be managed.
1 Like
Yes, but some airport do have the place to hold the plane before crossing, especially for most US airport with multiple parallel taxiways. No matter in what ways they won’t let the landing airplane, waiting for the crossing airplane. Landing always has the highest priority.
3 Likes